Level 1 and 2 Service Manual
6881024B40-A
6.
Insert a small slotted screwdriver carefully into one of the slots on the side of
the phone (see Figure 7B).
7.
Release the snaps with a prying motion toward the center of the housing while
lifting the front housing away from the phone.
8.
Repeat step 7 for each of the slots on the rear of the phone (Figure 7C).
9.
Release the snaps along the side of the phone by carefully moving the front
housing in a side-to-side motion.
10. Release the last two snaps near the antenna by sliding the front housing toward
the antenna.
Small Slotted Screwdriver
B
Slots
Front Housing
C
Figure 7. Removing the Front Housing (Continued)
October 27, 2003
Slot
Disassembly
032103o
21