Disassembly; Removing And Replacing The Battery Door - Motorola A920 Service Manual

Disassembly

Disassembly
G
G

Removing and Replacing the Battery Door

16
This section describes how to disassemble a A920 or A925 telephone. Tools and
equipment used are listed in Table 6, preceding.
Many of the integrated devices used in this equipment are vulnerable to damage
from electrostatic discharge (ESD). Ensure adequate static protection is in place
when handling, shipping, and servicing the internal components of this equipment.
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
To Remove the Battery Door
1. Ensure the phone is turned off.
2. Press the battery door release button.
3. Slide the battery door as indicated by the red arrow.
4. Carefully lift the battery door up and away from the phone.
Figure 4. Removing the Battery Door
To Replace the Battery Door
1. Align the battery door tabs to the slots on the back of the phone.
2. Lower the battery door onto the back of the phone.
3. Slide the battery door into its final position.
October 27, 2003
BATTERY RELEASE
A920, A925
020796o
6881024B40-A