Line Feed And Carriage Return - Newland NLS-HR200 Quick Start Manual

Programming Code

Line Feed and Carriage Return

Need to program stop suffix and enable it supports line feed and
carriage return.
Program Stop Suffix
Read "Program Stop Suffix". Then program stop suffix byte(s) to end
the suffix, read "Save ". The stop suffix byte is programmed in its
hex values. For Windows OS, the hex values of "line feed and carriage
return" are "0X0D/0X0A".
Program Stop Suffix
Stop Suffix Enable and Disable
Disable Stop Suffix
(Factory Default)
Steps for Windows OS to achieve "line feed and carriage return"
1、 Read "Code Programming ON"
2、 Read "Program Stop Suffix"
3、 Read "0""D""0""A"
4、 Read "Save "
5、 Read "Code Programming OFF"
6、Read "Allow Stop Suffix" to enable above programming. A line feed will appear to the
right of a barcode.
Code Programming ON
Code Programming OFF
Enable Stop Suffix
E-22