Wds Configuration; Wds Configuration Example - 3Com AP9152 Quick Configuration Manual

4

WDS Configuration

WDS Configuration Example

Network requirements
As shown in Figure
AP 1 and AP 2 are connected to different LAN se
The WDS link between AP 1 and AP 2 is formed in 80
Figure 4-1 Network diagram for WDS configuration
C onfiguration procedure
1) Select a correct country/region code
Select Advanced > Co
country/region code, as shown in
2) Configure WDS
Select Wireless Service > WDS
Figure 4-2.
Figure 4-2 WDS setup page
Fi nd the radio unit to be configured in the list, and click the corresponding
Setup page shown in
4-1:
untry/Region Code from the navigation tree to enter the page for setting a
Figure 3-2.
from the navigation tree to enter the WDS Setup page, as shown in
Figure 4-3.
gments.
2.11n (2.4GHZ) radio mode.
4-1
icon to enter the WDS