3Com AP9152 Quick Configuration Manual page 12

Click Apply.
3) Bind a radio to the wireless service an
Select Wireless Service > Access
wireless service, as shown in
Figure 3-4 Enable the wireless service
Click the Bind link in the
Set the service1 check box.
Click Enable.
4) Enable 802.11n radio (By default, the 80
Select Radio > Radio from the navigati
sure that 802.11n (5GHz) radio is enabled.
Figure 3-5 Enable 802.11n (5GHz) radio
Configuration verification
Select Summary > Client fro
the online clients.
Figure 3-6 View the online clients
d enable the wireless service
Service from the navigation tree to enter the page for enabling
Figure 3-4:
Wireless Service column, select the target radio, and click Bind.
2.11n (2.4GHz) radio is enabled.)
on tree to enter the Radio page, as shown in
m the navigation tree to enter the page as shown in
3-2
Figure 3-5 . Make
Figure 3-6 to view