3Com AP9152 Quick Configuration Manual page 38

Figure 3-51 View online clients
Configuration guidelines
When configuring 802.11n, note that:
To modify the 802.11n radio setup and 802.11n rates, shut down the radio first.
Select Radio > Radio from the navigation tree, select the AP to be configured, and click the
corresponding
802.11n-related parameters, including Bandwidth Mode, A-MSDU, A-MPDU, Short GI, and
Client 802.11n Only (permitting only 802.11n users to access the wireless network).
Make sure that 802.11n (2.4GHZ) is enabled.
Select Radio > Rate from the navigation tree to modify the 802.11n rate.
When satisfied with the configuration
Access Point restarts.
icon to enter the radio configuration page, where you can modify the
Save Configuration to File
3-28
to ensure it is not lost when the