Access Service Based Vlan Configuration Example - 3Com AP9152 Quick Configuration Manual

The IP addresses of clients obtained by the AP can be displayed only when ARP snooping is enabled.
By default, ARP snooping is enabled.
The client can be pinged successfully on the AP.
Confi guration guidelines
Note the following when configuring a wireless service:
Select a correct country/region code.
Make sure that radio
When satisfied with the configuration
Access Point restarts.

Access Service Based VLAN Configuration Example

Network requirements
As shown in Figure
that use different wireless security policies,
between wireless access users. More specifically,
Set up a wireless service named research, and configure it to use
access the WLAN are in VLAN 2.
Set up a wireless service named office, and configure it to use cl
that access the WLAN are in VLAN 3.
Figure 3-7 Network diagram for access service-based VLAN conf
IP network
C onfiguration procedure
1) Select a correct country/region code
Select Advanced > Country/R
cou try/region code, as shown in n
2) Configure a wireless service named research.
# Create a wireless
Select Wireless Service > Access Service from the navigation tree, and click Create to enter the page
for creating a wireless service.
Configure the nam
Select the wireless service type crypto.
Click Apply.
is enabled.
Save Configuration to File
3-7, it is required to configure the AP to provide multiple wireless access services.
FAT AP
L 2 switch
egion Code from the navigation tree to enter the page for setting a
Figure 3-2.
service.
e of the wireless service as research.
and are bound to different VLANs to implement isolation
iguration
SSID ： research
VLAN ： 2
Client 1
SSID ： office
VLAN ： 3
Client 2
3-3
to ensure it is not lost when the
PSK authentication. Clients that
ear text authentication. Clients