Intended Use; Operating Order - RoboLabs VPM-RGM2 User Manual

4 Intended use

• DO NOT USE if power cord, or plug, or wall outlet are damaged, and also if
chamber lamp is blown out.
• DO NOT USE emergency stop switch for routine stop. Doing so might lead to
machine failure and smoke formation. Use only in case of emergency.
• MAKE SURE ALL FOUR SWIVEL CASTERS IS LOCKED. Unlocked swivel casters
might lead to accidental move of the machine.
• DO NOT NOT LEAVE running machine UNATTENDED.
• DO NOT OPERATE with blown chamber lamp.
• Outer surfaces of chamber, corn supply tube, and corn bin might be very hot
during operation. DO NOT TOUCH the hot surfaces.
• Hot air comes out from the corn supply tube (see Fig. 2) during machine
operation. STAY CLEAR.
• MAKE SURE FIXED GUARD IS SECURED on its place (see Fig. 2). Touching
rotating auger might cause hand or finger injury.

4.1 Operating order

1. Make sure the chamber is clean. If not, clean the chamber.
2. Make sure the receiving device (e.g. sifter VPM-RGSM3EU) is running.
3. Fill the corn bin with corn kernels.
4. Press START push button on the control panel. Wait until HMI display shows the start screen.
The yellow reading with PV means process value temperature. The white reading of the
temperature represents the set value:
DANGER
WARNING
WARNING
WARNING
9