Intended Use; Operation Modes; Quick Operation Guide - RoboLabs ROBOPOP 60 Operating Manual

2. Intended Use

2.1. Operation Modes

The popper has following operation modes:
- Heating mode. Once desired program button is pressed, popper
automatically starts to heat up. Upon reaching certain temperature popper
switches automatically to popping mode.
- Popping mode. This is the main operation mode.
- Pause mode. Popper doesn't process corn in this mode, but maintains
temperature in the chamber; thus, popping process can be resumed in no
time.
- Cooling mode. Before turning off, popper must be cooled down. In cooling
mode heating elements are completely de-energized; turbine keeps
running, cooling down the machine. Once temperature drops low enough,
popper is turned off automatically.
- Testing mode. This mode is used for testing popper components. See
Annex D for more details.

2.2. Quick Operation Guide

DO NOT LEAVE MACHINE UNATTENDED!
ALWAYS FILL CORN HOPPER TO THE TOP!
Make sure that scrap tray is empty and chamber is clean and not clogged.
Put empty plastic bag into popcorn cart and put the cart under the sifter.
Put raw corn in corn hoppers, salt in salt hopper, and liquid oil in oil
compartment. Turn the machine on. Start screen will appear:
tm2692 Jan-20
10