Canon EOS C300 Mark II Instruction Manual page 94

Onscreen Markers, Zebra Patterns and False Color
Center Marker / Horizontal Marker / Grid Marker
1 Select > [A Assistance Functions] > [Center Marker], [Horizontal Marker] or [Grid Marker] > Desired
marker color.
• Select [Off] to turn off the marker.
94
2 For [Center Marker] only: Select
shape.
Aspect Marker
1 Select > [A Assistance Functions] > [Aspect Marker] > Desired marker color or transparency of the
masked area.
• Select [Off] to turn off the marker.
2 Select > [A Assistance Functions] > [Marker Aspect Ratio] > Desired option.
• If you selected one of the preset aspect ratios, the rest of the procedure is not necessary. If you selected
[Custom], perform step 3 to specify the aspect ratio.
3 For [Custom] only: Select
aspect ratio using the data entry screen (A 60).
Safe Area Marker
If an aspect marker is not selected, the safe area will be calculated as a percentage of the whole image and you
can only select the percentage. To calculate the safe area as a percentage of an aspect ratio marker, select an
aspect marker in advance (previous procedure).
1 Select > [A Assistance Functions] > [Safe Area Marker] > Desired marker color.
• Select [Off] to turn off the marker.
2 Only when an aspect marker is already activated: Select
Marker Safe Area] > [Whole Picture] or [Selected Aspect Marker].
3 Select > [A Assistance Functions] > [Marker Safe Area %] > Desired percentage.
• You can select the margin as a percentage of the total frame area [(Area)] or as a percentage of the width/
height [(Side Length)].
User Markers
1 Select > [A Assistance Functions] > [User Marker 1] or [User Marker 2] > Desired marker color.
• Select [Off] to turn off the marker.
2 Select > [A Assistance Functions] > [User Marker 1 Size] or [User Marker 2 Size] and enter the width
[W] and height [H] using the data entry screen (A 60).
3 Select > [A Assistance Functions] > [User Marker 1 Position] or [User Marker 2 Position] and enter
the [X] and [Y] coordinates using the data entry screen (A 60).
• If necessary, repeat the procedure from the beginning to display both user markers.
NOTES NOTES
• After activating the onscreen markers you can set
FUNC/MENU] and then select display level 2 to turn off all other onscreen displays, leaving only the markers
(A 57).
• If you set an assignable button to [Markers: All], [Markers: VIDEO Term.], [Markers: EVF-V50], [Markers: MON./
HDMI] or [Markers: SDI OUT] (A 125), you can press the button to turn the markers on and off on all
monitoring devices, the supplied LCD screen, an optional viewfinder or external monitors, respectively.
> [A Assistance Functions] > [Center Marker Type] > Desired marker
> [A Assistance Functions] > [Marker Custom Asp. Ratio] and enter the
> [¢ Monitoring Setup] > [DISP Level 2] to [Only
> [A Assistance Functions] > [Basis for