Canon EOS C300 Mark II Instruction Manual page 126

Assignable Buttons
NOTES
• You can check the [
assigned to each button.
126
• You can reset only the functions assigned to the assignable buttons, without affecting other camera settings,
with the
return to their default function.
• When you select [Enable] in
assignable buttons 1–4 on the camera can also be assigned to assignable buttons 1–4 of the RC-V100,
RC-IP100/RC-IP1000, Remote Camera Control Application, and Multi-Camera Control.
Assignable functions
Functions can be set separately in CAMERA mode and MEDIA mode. Refer to the following table for assignable
functions and available modes.
Function name
[One-Shot AF]
1
[AF Lock]
[Face AF]
[Face Detection]
[Tracking]
[Focus Guide]
Focus Position Marker1
Focus Position Marker2
Focus Position Marker3
[Peaking: All]
[Peaking: All(+SDI OUT)]
[Peaking: VIDEO Term.],
[Peaking: EVF-V50],
[Peaking: MON./HDMI],
[Peaking: SDI OUT]
[Magnification]
[Magn.: VIDEO Term.],
[Magn.: EVF-V50],
[Magn.: MON./HDMI]
[Tele-converter]
[Push Auto Iris]
[Iris Mode]
[Iris +], [Iris –]
[ND +], [ND –]
[AE Shift +], [AE Shift –]
[Backlight], [Spotlight]
Assignable Buttons] status screens (A 210) to see what functions are currently
> [B System Setup] > [Reset] > [Assignable Buttons] function. All the assignable buttons will
> [
The camera focuses automatically one time only (one-shot AF function).
Locks the focus during continuous AF.
Toggles the [Face AF] setting between [Face Priority] and [Face Only].
Turns the face detection function on/off.
Turns the tracking function on/off.
Turns the focus guide on/off.
1
Registers [Marker 1 Color] to [Marker 3 Color] set in MENU as the focus position
1
markers.
1
Turns peaking on/off on all monitoring devices, except on those connected to the
SDI OUT terminal.
Turns peaking on/off on all monitoring devices.
Turns peaking on/off only on the LCD monitor, an optional viewfinder or external
monitors, respectively.
Turns magnification on/off.
Selects the output terminal for the magnified display and turns magnification
on/off only on the LCD monitor, an optional viewfinder or external monitors,
respectively.
Cycles through the digital tele-converter options in the following order:
x1.5  x2.0  x2.5  x3.0 Off.
The camera automatically adjusts the aperture only while the button is held
pressed down.
Switches the aperture adjustment mode between automatic and manual.
Opens up/closes the aperture, respectively.
Cycles through ND filter settings in increasing (higher density) or decreasing
(lower density) order, respectively.
Compensates the exposure making the image brighter/darker, respectively.
Toggles the light metering mode between [Standard] and [Backlight]/[Spotlight],
respectively.
Assignable Buttons] > [Link to Camera], the functions assigned to
Description
CAMERA MEDIA
A
mode mode
Ü
– 86
Ü
– 88
Ü
– 89
Ü
– 89
Ü
– 90
Ü
– 83
Ü
– 85
Ü
– 84
Ü
– 84
Ü
– 92
Ü
– 76
Ü
–
74
Ü
–
Ü
– 73
Ü
– 77
Ü
– 77