Canon EOS C300 Mark II Instruction Manual page 52

Recording Video and Photos
To take photos
In CAMERA mode, you can take photos using an assignable button. Photos are saved onto the SD card and
their size depends on the sensor mode (A 62) in use. For details, refer to
1 Set an assignable button to [Photo] (A 125).
52
2 When the camera is in record standby mode, press the assignable button.
• 8 appears at the top right of the screen and the photo is recorded on the SD card.
• The SD CARD access indicator will illuminate in red.
IMPORTANT
• Be sure to save your recordings regularly, especially after making important recordings. Canon shall not be
liable for any loss or corruption of data.
NOTES NOTES
• You can use the review function (A 116) to play back part or all of the last clip recorded without having to
switch to MEDIA mode.
• If you record using metadata settings, those settings will be recorded with the clip. For more details, refer to
Using Metadata
(A 114).
• If the camera switches to the other CFexpress card while recording video due to the relay recording function
(A 47), the two parts (before/after the switch) will be recorded as separate clips.
• A single XF-AVC clip can be recorded continuously for up to 6 hours. At that point, a new clip will be created
automatically and recording will continue on a separate clip.
• If you set
the tally information for PGM is input.
• To record photos, make sure the SD card is not write-protected.
• Photos cannot be recorded in the following cases.
- While recording video.
- When slow & fast motion recording is activated.
- When the main recording format is set to RAW and the resolution is set to [4192x3140 (4:3)] or [3768x3140
(6:5)].
- When pre-recording is activated.
- While color bars are displayed.
- While Browser Remote is activated.
> [B System Setup] > [Tally Lamp Settings] to other than [REC], the tally lamp lights when
Specifications
(A 236).