Canon EOS C300 Mark II Instruction Manual page 160

Applying a LUT to Video Outputs
2 When the confirmation message appears, press SET.
Renaming a User LUT
160
You can rename each of the four user LUTs in the camera.
Select > [
• Enter the desired LUT name (up to 8 characters) using the keyboard screen (A 36).
Checking a User LUT's Settings
Select > [
• Use the joystick or SELECT dial to review all the information and press the CANCEL button to return to the
menu.
NOTES
About LUT files
- The camera supports LUT files (3D LUT/.cube format) in 17 grid or 33 grid format created with Blackmagic
Design's DaVinci Resolve.
- LUT files with input ranges outside the 0 to 1 range in the header ("LUT_3D_INPUT_RANGE") are not
supported.
- LUT files which include values outside of the 0 to 1 range in the data area are not supported.
- LUT files 2 MB and larger, as well as files with a name containing over 65 characters are not supported.
- Only the following characters can be used in the file name:
Numbers 0 to 9, upper/lower case letters a to z, underscore (_), hyphen (-), period (.) and a single byte
space.
• Save a LUT file to the root directory of the SD card.
• If the correct color space for the output signal ([Color Space (Output)]) is not selected, video will not be output
correctly.
• User LUT files in the camera cannot be overwritten. If necessary, delete a user LUT file in the camera before
registering a different LUT file.
¢
Monitoring Setup] > [User LUT 1] to [User LUT 4] > [Rename].
¢
Monitoring Setup] > [User LUT Info].