Adding $ Marks Or % Marks; Deleting $ Marks Or % Marks; Adding Shot Marks - Canon EOS C300 Mark II Instruction Manual

Clip/Photo Operations

Adding $ Marks or % Marks

You can add an OK mark ($) or check mark (%) to XF-AVC primary clips to help you identify particular clips.
Since clips with an $ mark cannot be deleted with the camera, you can use this mark also to protect important
clips.
146
Adding an $ Mark or % Mark During Playback
To add an $ mark or % mark to a clip during playback or playback pause, you must set an assignable button
to [Add $ Mark] or [Add % Mark] in advance.
1 Set an assignable button to [Add $ Mark] or [Add % Mark] (A 125).
2 Select the desired clip in the [XF-AVC] index screen and press the Ò button.
3 During playback or playback pause, press the assignable button to add the clip mark.
• [$Mark] or [%Mark] will appear briefly and the selected clip mark will be added to the clip.
• Adding a clip mark to a clip during playback will pause the playback.
• $ or % appears at the top right of the clip playback screen.
Adding an $ Mark or % Mark from the Index Screen
1 Select the desired clip in the [XF-AVC] index screen.
2 Press SET (clip menu) and select [Add $ Mark] or [Add % Mark] > [OK].
• The selected clip mark is added to the clip and $ or % appears next to the clip's thumbnail.
NOTES
• A clip cannot have both an $ mark and % mark at the same time. When you add a % mark to a clip with an
$ mark, the $ mark will be deleted. Similarly, when you add an $ mark to a clip with a % mark, the %
mark will be deleted.

Deleting $ Marks or % Marks

1 Select the desired clip in the [XF-AVC] index screen.
2 Press SET (clip menu) and select [Delete $ Mark] or [Delete % Mark] > [OK].
• The selected mark is deleted.

Adding Shot Marks

During the playback of a primary clip recorded in XF-AVC format, you can add shot marks (!) to particular
frames in the clip that you want to single out. To add a shot mark to a clip during playback or playback pause,
you must set an assignable button to [Add Shot Mark] in advance.
1 Set an assignable button to [Add Shot Mark] (A 125).
2 Select the desired clip in the [XF-AVC] index screen and press the Ò button.
3 During playback or playback pause, press the assignable button at the point in the clip where you
want to add the shot mark.
• [Shot Mark] will appear briefly and the shot mark will be added to the current frame of the clip.
• Adding a shot mark to a clip during playback will pause the playback.