Network Functions; About The Network Functions - Canon EOS C300 Mark II Instruction Manual

7

About the Network Functions

To be able to use the following network functions, you will need to attach an optional WFT-E9 Wireless File
Transmitter to the system expansion terminal (A 14) and connect to a Wi-Fi network, or attach an expansion
unit to the camera and use the
network. For details about the accessories and how to attach them, refer to the Cinema EOS System Expansion
User Guide.
Network functions and connection types
Network function
Transfer clips recorded with the camera to
FTP File Transfer another device connected to the network
using the FTP protocol.
Stream the camera's live video and audio over
IP Streaming IP to a compatible IP video decoder connected
to the network.
Control the camera remotely from the Web
Browser Remote
browser of a connected device.
Control the camera remotely using a
XC Protocol controller or application compatible with the
XC Protocol via an IP connection.
1
Connection to a Wi-Fi network via an external access point (wireless router, etc.)
2
Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point.
Before using the network functions
• The instructions in this chapter assume you already have a correctly configured and working network and
correctly configured network device(s). If necessary, refer to the documentation provided with the network
devices you plan to use.
• Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet)
and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations.
IMPORTANT
• Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or
settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions.
• Avoid using open networks or networks without sufficiently strong security settings. Using an unprotected
network can expose your data to monitoring by unauthorized third parties.
NOTES
• Do not open the card compartment cover while using network functions.
• Do not place cables connected to the camera's terminals near the optional WFT-E9 Wireless File Transmitter.
Doing so may negatively affect the wireless communication over Wi-Fi.
(Ethernet) terminal on the expansion unit to connect to a wired (Ethernet)
Wired network
Description

Network Functions

Wi-Fi
1
(Ethernet)
Infrastructure
Ü Ü
A
Camera Access
2
Point
Ü
180
– 181
Ü
183
Ü
190
163