Canon EOS C300 Mark II Instruction Manual page 156

Connecting to an External Monitor or Recorder
[Gamma]
156
[BT.709 Wide DR]
[BT.709 Normal]
[BT.709 Standard]
[Canon 709]
–
1 Select
2 Select [During Canon Log Output] or [During HDR Output] > Desired option.
• Repeat the procedure as necessary to select the output range for other terminals or output signals.
Options for [Range: SDI OUT], [Range: MON.]
[Full Range]: The signal output will use full range coding.
[Narrow Range]:
The signal output will use narrow range (video range) coding.
Options for [Range: HDMI]
[Full Range Priority]:
The signal output will use full range coding whenever possible but will change the range
automatically according to the capabilities of the connected monitor.
[Narrow Range]:
The signal output will use narrow range (video range) coding.
NOTES
• Settings will change depending on the gamma curve component of the [Gamma/Color Space] setting in the
custom picture file. When a LUT is applied, settings will change also depending on the gamma curve selected
for the output signal. If a user LUT is applied, the output range will be determined by the user LUT's [Range
(Output)] setting.
Custom picture file
[Look File]
[Off]
[On] [Conform to Custom Picture]
[Off]
[On] [Conform to Custom Picture]
[Off]
[On] [Conform to Custom Picture]
[Off]
[On] [Conform to Custom Picture]
[On]
¢
> [ Monitoring Setup] > [Range: SDI OUT], [Range: MON.] or [Range: HDMI].
[Gamma/Color Space]
after the Look File is applied
–
–
–
–
[SDR BT.709]
[SDR BT.2020]
[HDR PQ(BT.2100)]
[HDR HLG(BT.2100)]
Applied range settings
> [¢ Monitoring Setup] > [Range: HDMI]
–
(Fixed narrow range)
[During HDR Output]