Canon EOS C300 Mark II Instruction Manual page 174

Configuring Connection Settings
Changing Settings using the Wizard
1 Select
[SET20]) > [Change with Wizard].
2 Select the desired network function and then follow the wizard as described in the previous procedure (from
174
step 3, A 167) and make any changes as necessary.
Changing Connection Settings using Existing Settings
You can use previously registered communication settings ([NW] files) or function settings ([MODE] files) to easily
replace the content of a connection setting or to add a second network or network function in addition to those
registered using the wizard.
1 Select
[SET20]) > [Select Existing Setting].
To add/replace a communication or function setting
2 Select the setting you want to change > [Select Existing Setting] > Desired NW or MODE file.
• In the list of communication settings and function settings registered in the camera, only those that can be
selected will be displayed in white and others will be grayed out.
3 Select [Set].
• If necessary, select [Check Comm. Settings] or [Check Function Settings] to check the content of the
selected file before making the change.
To delete a communication or function setting
2 Select the setting you want to change > [Clear Selected] > [OK].
NOTES
• A connection setting can have two communication settings (primary/secondary network) and up to two
function settings (only for [IP Streaming] and [Browser Remote]).
• If both function settings are deleted, the connection setting itself will be reset and will appear as [Unspecified].
Renaming Connection Settings
You can rename connection setting files to make them easier to identify from the list.
Select > [
> [Settings Name].
• Enter the desired name (up to 12 characters) using the keyboard screen (A 36).
Deleting Connection Settings
Select > [
> [Delete Settings] > [OK].
• The connection setting will be deleted.
NOTES
• Even if you delete a connection setting, the individual communication/function settings stored in it are not
deleted. You can reuse these settings to configure other connection settings.
> [ Network Settings] > [Connection Setting] > Desired connection setting ([SET1] to
> [ Network Settings] > [Connection Setting] > Desired connection setting ([SET1] to
Network Settings] > [Connection Setting] > Desired connection setting ([SET1] to [SET20])
Network Settings] > [Connection Setting] > Desired connection setting ([SET1] to [SET20])