Canon EOS C300 Mark II Instruction Manual page 189

3 [ Activate] button
Touch the button to give priority to the metadata entered in this screen when recording clips. This overrides
the metadata read from a file saved on the SD card.
4 [Overwrite Previous] button
After recording a clip: Touch [Overwrite Previous] to send the metadata entered in this screen to the camera,
replacing any metadata embedded in the last clip recorded.
5 [Apply from Next] button
Touch the button to send the metadata entered in this screen to the camera so it is embedded only with clips
that are recorded after the transfer. This option does not overwrite the metadata of clips already recorded or
being recorded.
6 [Overwrite] button
While recording: Touch [Overwrite] to send the metadata entered in this screen to the camera, replacing any
metadata that the clip being recorded might have.
7 [Clear All] button
Touch to delete all the data entered.
NOTES
• The metadata sent to the camera from Browser Remote will be lost in the following cases.
- The camera is turned off.
- The > [3 Recording/Media Setup] > [Metadata] > [Setting] setting was changed.
• Using Browser Remote ([
However, you cannot return the priority back to the SD card. To use a user memo file saved on a card you will
need to set > [3 Recording/Media Setup] > [Metadata] > [Setting] to [SD Card] on the camera itself.
• If you use Browser Remote to transfer user memo information to a relay clip after the switch, the user memo
will not be saved to the clip recorded before the camera switched cards.
Browser Remote: Controlling the Camera from a Network Device
Activate] button) you can give priority to metadata sent from the application.
189