Selecting The Onscreen Display Level - Canon EOS C300 Mark II Instruction Manual

Selecting the Onscreen Display Level

You can press the DISP button to change the onscreen display level and control the amount of information
shown over the image. In CAMERA mode, you can customize each display level individually.
Press the DISP button to select the desired display level.
• Repeatedly pressing the DISP button will change the display level:
Display level 1 → Display level 2 → Display level 3.
Customizing Onscreen Display Levels
In CAMERA mode, you can change the information displayed at each display level. In most cases, icons are
displayed at a smaller size. Only the [All Displays] option of display level 1 uses a larger size for onscreen
displays.
Select > [¢ Monitoring Setup] > [DISP Level 1], [DISP Level 2] or [DISP Level 3] > Desired option.
Options for display level 1
[All Displays]: All onscreen displays at a larger size.
[All Displays (Periph. Border)]:
All onscreen displays at a smaller size, more appropriate for use with the peripheral border
(A 58).
Options for display level 2
[Main Recording Displays]:
Only the onscreen displays most relevant for shooting.
[Only FUNC/MENU]:
Usually no onscreen displays except for the recording
operation (REC/STBY). When the FUNC or MENU button
is pressed, the necessary information will be displayed
temporarily (for as long as you are changing the settings).
Options for display level 3
[Only REC/STBY]:
No onscreen displays except for the recording operation (REC/STBY).
[No Displays]: No onscreen displays at all.
Recording Video and Photos
Example of the
[Main Recording Displays] option
57