Jeep Wrangler Owner's Manual page 77

76 GETTING TO KNOW YOUR INSTRUMENT PANEL
Vehicle Info
Push and release the up or down
the Vehicle Info menu icon is displayed in the instrument
cluster display. Push and release the left
arrow button to scroll through the information submenus
and push and release the OK button to select or reset the
resettable submenus.
Tire Pressure Coolant Temperature
Transmission Temperature
Oil Temperature
— Automatic Transmission
Only
Oil Pressure Oil Life
Battery Voltage
Off Road
Push and release the up or down
the Off Road menu icon is displayed in the instrument
cluster display. Push and release the left
arrow button to scroll through the information submenus.
 Drivetrain
 Front Wheel Angle: displays the graphical and
arrow button until
numerical value of calculated average front wheel
angle from the steering wheel orientation.
or right
 Transfer Case Lock Status: displays "Lock"
graphic only during 4WD High, 4WD High Part
Time, 4WD Low status.
 Axle Lock And Sway Bar Status (If Equipped):
displays front and rear or rear only axle locker
graphic, and sway bar connection graphic with text
message (connected or disconnected).
 Pitch And Roll
 Displays the pitch and roll of the vehicle in the
graphic with the angle number on the screen.
NOTE:
When vehicle speed becomes too high to display the pitch
and roll, "- -" will display in place of the numbers, and the
graphic will be grayed out. A message indicating the
necessary speed for the feature to become available will
arrow button until
also display.
or right
Driver Assist — If Equipped
The Driver Assist menu displays the status of the ACC
systems.
Push and release the up or down
the Driver Assist menu is displayed in the instrument
cluster display.
Adaptive Cruise Control (ACC) Feature — If Equipped
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the ACC ON/OFF button (located on the steering
wheel) until one of the following displays in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read "Adaptive
Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting has
not been selected, the display will read "Adaptive Cruise
Control Ready."
Push the SET + or the SET - button (located on the steering
wheel), and the following will display in the instrument
cluster display.
arrow button until