Jeep Wrangler Owner's Manual page 235

234 SERVICING AND MAINTENANCE
3. Insert the hook on the tip of the arm through the
opening in the wiper blade.
4. Slide the wiper blade up into the hook on the wiper
arm, latch engagement will be accompanied by an
audible click.
5. Gently lower the wiper blade onto the glass.
Rear Wiper Blade Removal/Installation
1. Open the swing gate to access the wiper arm.
Rear Wiper Assembly
1 — Wiper Arm
2 — Wiper Blade
2. Lift wiper arm off of the glass and rotate wiper blade
outward to disengage the wiper blade from the wiper
arm.
Wiper Blade And Wiper Arm
1 — Wiper Arm
2 — Wiper Blade
3. Gently set the arm on the glass.
Wiper Blade Removed From Wiper Arm
1 — Wiper Blade Pivot Pin
2 — Wiper Arm Receptacle
Installing The Rear Wiper
1. Lift the wiper arm off of the glass.
2. Insert the wiper blade pivot pin into the opening on
the end of the wiper arm and rotate the wiper in to
place.
3. Place with wiper on the glass and close the swing
gate.