Jeep Wrangler Owner's Manual page 143

142 MULTIMEDIA
Doors Off Key Off Power Delay
Headlight Off Delay
Audio
When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle's sound system. These settings can change the audio location within the
vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.
NOTE:
Depending on the vehicle's options, feature settings may vary.
Speed Adjusted Volume
AUX Volume Offset
Setting Name
Setting Name
Balance/Fade
Equalizer
Description
This setting will keep certain electrical features running after the engine is turned off.
When any door is opened, the electronics will deactivate. The available settings are "0
sec", "45 sec", "5 min", and "10 min".
This setting will allow you to set the amount of time the headlights remain on after the
vehicle has been turned off. The "+" will increase the amount of time. The "-" will
decrease the amount of time.
Description
This setting will adjust audio levels from specific speakers in the front/back and left/right of
the vehicle. The Speaker icon can be moved to set audio location.
This setting will adjust the "Bass", "Mid", and "Treble" ranges of the audio.
This setting will adjust audio volume as speeds increase. At a higher setting, the volume will
increase more as the vehicle speeds up. The available settings are "Off", "1", "2", and "3".
This setting will tune the audio levels from a device connected through the AUX port. The
available settings are "+" and "-".