Output VOLT: Output voltage calibration. Click value columns and it
will pop up
. Then, each click is 0.1% no matter it's pressing up or down
key
. Press "up" key to increase 0.1% and press "down" key to decrease
0.1%. Press "OK" key to confirm the modification.
Inverter VOLT: Inverter voltage calibration. Click value columns and it
will pop up
. Then, each click is 0.1% no matter it's pressing up or down
key
.
Press "up" key to increase 0.1% and press "down" key to decrease 0.1%.
Press "OK" key to confirm the modification.
VOLTAGE CALIBRATE Page 5
VOLTAGE CALIBRATE Page 6
37