Advertisement
Available languages
Available languages
Do not install the UPS system near water or in moist environments.
Do not install the UPS system where it would be exposed to direct
sunlight or nearby heat source.
Do not block ventilation holes on the UPS housing.
1.3 Installation
Do not connect appliances or devices which would overload the UPS
(e.g. big motor-type equipment)) to the UPS output terminal.
Place cables in such a way that no one can step on or trip over them.
Do not block air vents on the housing of the UPS. Ensure proper unit
spacing of ventilation.
UPS came equipped with grounding terminal, in the final installation
phase, connect grounding/earthing wire to the external UPS battery
cabinets or appropriate grounding terminals.
The UPS can be installed only by qualified maintenance personnel.
An appropriate disconnect device such as short-circuit backup
protection should be incorporated during installation.
An integral emergency shutoff switch which prevents additional load
from the UPS in any mode of operation should be implemented during the
installation.
Secure the grounding/earthing wire before connecting to any live wire
terminal.
Installation and Wiring must be in accordance with the local electrical
laws and regulations.
3
Advertisement
