Bypass VOLT: Bypass voltage calibration. Click value columns and it
will pop up
. Then, each click is 0.1% no matter it's pressing up or down
key
. Press "up" key to increase 0.1% and press "down" key to decrease
0.1%. Press "OK" key to confirm the modification.
CURRENT CALIBRATE
Output CURR: Output current calibration. Click value columns and it
will pop up
. Then, each click is 0.1% no matter it's pressing up or down
key
. Press "up" key to increase 0.1% and press "down" key to decrease
0.1%. Press "OK" key to confirm the modification.
INITIAL
38
Current Calibrate Page
INITIAL menu Page1