GE PGS908 Owner's Manual page 16

.Using the range or control lock-out.
[[ RA.GE
JILOCK-OUT
J[LOcK/U.LoC___________K ....
I _
Range Lock-Out (on some models)
Yourcontrol will allow you to lock out the surface
burners,ovenburners and control panel so they
cannot be activated.
To lock/unlock tile controls:
Turn all smf_me burners off,.
f_ Touch and hoM tlle RANGE
lOCg-OUTpad for 3 seconds until
tile display shows LOCON.
When this feature is on and the touch
pads are touched, tlle control will beep
and tile display will show LOCON.
Thecontrollock-out m odeaffectsall controls.
Nocontrolswill workwhenthisfeatureis
acdvatec_
Theadjustment w ill beretainedin memory
aftera powerfailure.
%
To unlock tile control, touch and
hoM tile RANGE LOCK-OUTpad
fbr
3 seconds until tile display shows
tOC OFF.
ii!_
CONTROLLOCKOUT
Control Lockout (on some models)
Yourcontrol will allow you to lock out the touch
pads so they cannot be activated when pressed.
To lock! unlock die conUols:
[_ Touch
tile 9 and 0pads at tile same
time for 3 seconds, until tile display
shows LOC ON.
[_ To tmlock tile control, touch tile 9
and 0 pads at the same time for 3
seconds, until the display shows
tOC OFF.
When this feature is on and the touch
pads are touched, tlle control will beep
and tile display will show LOC ON.
,, Thecontrol lock-out mode affects all touch
pads. No touchpads will work when this
feature is activated.
Theadjustment w ill beretainedin memory
aftera powerfailure.
16