Paper - Sharp MX-C528P User Manual

Use printer menus

Paper

Tray Configuration
Menu item
Default Source
Tray [x] (1*)
Multipurpose Feeder
Manual Paper
Manual Envelope
Paper Size/Type
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Substitute Size
Off
Letter/A4
All Listed*
Configure MP
Cassette*
Manual
First
Note: An asterisk (*) next to a value indicates the factory default setting.
Media Configuration
Universal Setup
Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3.5–19 inches (8.5*)
88.9–482.6 mm (216*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the paper source for all print jobs.
Specify the paper size or paper type loaded in each paper source.
Set the printer to substitute a specified paper size if the requested size is not
loaded in any paper source.
Notes:
•
Off prompts the user to load the required paper size.
•
All Listed allows all available substitutions.
Determine the behavior of the multipurpose feeder.
Notes:
•
Cassette configures the multipurpose feeder as the automatic paper
source.
•
Manual sets the multipurpose feeder only for manual-feed print jobs.
•
First configures the multipurpose feeder as the primary paper source.
Description
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Set the portrait width of the universal paper.
84