Sharp MX-C528P User Manual page 81

Use printer menus
PostScript
Menu item
Print PS Error
Off*
On
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
Off
On*
Image Smoothing
Off*
On
Font Priority
Resident*
Flash/Disk
Wait Timeout
Off
On* (40 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item
Font Source
Resident*
Disk
Download
Flash
Font Card
All
Font Name
[List of available fonts] (Courier*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Print a page that describes the PostScript® error.
Note: When an error occurs, processing of the job stops, the printer
prints an error message, and the rest of the print job is flushed.
Set the minimum stroke width.
Note: Jobs printed in 1200 dpi use the value directly.
Disable the SysStart file.
Enhance the contrast and sharpness of low‑resolution images.
Note: This setting has no effect on images with a resolution of 300 dpi or
higher.
Establish the font search order.
Notes:
•
Resident sets the printer to search its memory for the requested font
before searching the hard disk or intelligent storage drive (ISD).
•
Flash/Disk sets the printer to search the hard disk or ISD for the
requested font before searching the printer memory.
•
This menu item appears only when a hard disk or an ISD is installed.
Enable the printer to wait for more data before canceling a print job.
Description
Select the source which contains the default font selection.
Notes:
•
Disk and Flash appear only when a non-defective, non-protected
hard disk or intelligent storage drive (ISD) that contains fonts is
installed.
•
Download appears only if downloaded fonts exist in the printer
memory.
•
Font Card appears only when an ISD is installed.
Select a font from the specified font source.
81