Sharp MX-C528P User Manual page 56

Set up, install, and configure
Configuring Wi‑Fi Direct
®
Wi-Fi Direct allows wireless devices to connect directly to a Wi-Fi Direct‑enabled printer without using an
access point (wireless router).
Before you begin, make sure that a wireless module is installed on your printer. For more information, see the
Installing wireless modules
1
From the home screen, touch Settings > Network/Ports > Wi-Fi Direct.
2
Configure the settings.
•
Enable Wi‑Fi Direct—Enables the printer to broadcast its own Wi‑Fi Direct network.
•
Wi‑Fi Direct Name—Assigns a name for the Wi‑Fi Direct network.
•
Wi‑Fi Direct Password—Assigns the password for negotiating the wireless security when using the
peer‑to-peer connection.
•
Show Password on Setup Page—Shows the password on the Network Setup Page.
•
Auto-Accept Push Button Requests—Lets the printer accept connection requests automatically.
Note: Accepting push‑button requests automatically is not secured.
Notes:
•
By default, the Wi-Fi Direct network password is not visible on the printer display. To show the password,
enable the password peek icon. From the home screen, touch Settings > Security > Miscellaneous >
Enable Password/PIN Reveal.
•
You can see the password of the Wi-Fi Direct network without showing it on the printer display. From the
home screen, touch Settings > Reports > Network > Network Setup Page.
Connecting a mobile device to the printer
Before connecting your mobile device, make sure that Wi‑Fi Direct has been configured. For more information,
see "Configuring Wi‑Fi Direct" on page
Connecting using Wi‑Fi Direct
Note: These instructions apply only to Android mobile devices.
1
From the mobile device, go to the settings menu.
2
Enable Wi‑Fi, and then tap Wi‑Fi Direct.
3
Select the printer Wi-Fi Direct name.
4
Confirm the connection on the printer control panel.
Connecting using Wi‑Fi
1
From the mobile device, go to the settings menu.
2
Tap Wi‑Fi, and then select the printer Wi-Fi Direct name.
Note: The string DIRECT-xy (where x and y are two random characters) is added before the Wi-Fi Direct
name.
3
Enter the Wi-Fi Direct password.
section.
56.
56