Sharp MX-C528P User Manual page 97

Use printer menus
HTTP/FTP Settings
Menu item
Proxy
HTPP Proxy IP Address
HTTP Default IP Port
FTP Proxy IP Address
FTP Default IP Port
Authentication
User Name
Password
Local Domains
Other Settings
Enable HTTP Server (On*)
Other Settings
Enable HTPPS (On*)
Other Settings
Force HTTPS Connections (Off*)
Other Settings
Enable FTP/TFTP (On*)
Other Settings
HTTPS Device Certificate (default*)
Other Settings
Timeout for HTTP/FTP Requests (30*)
Other Settings
Retries for HTTP/FTP Requests (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
ThinPrint
Menu item
Enable ThinPrint
Off*
On
Port Number
4000–4999 (4000*)
Bandwidth (bits/sec)
100–1000000 (0*)
Packet Size (kbytes)
0–64000 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the HTTP and FTP server settings.
Access the Embedded Web Server to monitor and manage the printer.
Enable Hypertext Transfer Protocol Secure (HTTPS) to encrypt data
transferring to and from the print server.
Force the printer to use HTTPS connections.
Send files using FTP/TFTP.
View the HTTP device certificate used on the printer.
Specify the amount of time before the server connection stops.
Set the number of retries to connect to the HTTP/FTP server.
Description
Print using ThinPrint.
Set the port number for the ThinPrint server.
Set the speed to transmit data in a ThinPrint environment.
Set the packet size for data transmission.
97