Loading Paper And Specialty Media - Sharp MX-C528P User Manual

Set up, install, and configure
Enabling Magnification mode
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
Note: For printer models without built-in speakers, use headphones to hear the message.
2
Using two fingers, do the following:
a
Touch Magnification mode.
b
Touch OK.
Note: If the gesture does not work, then apply more pressure.
For more information on navigating a magnified screen, see
24.

Loading paper and specialty media

Setting the size and type of the specialty media
The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes,
do the following:
1
From the home screen, touch Settings > Paper > Tray Configuration > Paper Size/Type > select a paper
source.
2
Set the size and type of the specialty media.
Configuring Universal paper settings
1
From the home screen, touch Settings > Paper > Media Configuration > Universal Setup.
2
Configure the settings.
Enabling the Multiple Universal Sizes setting
1
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Tray
Configuration.
2
Enable the Multiple Universal Sizes setting.
Loading trays
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Remove the tray.
Note: To avoid jams, do not remove trays while the printer is busy.
"Navigating the screen using gestures" on page
25