Advertisement
OPTIONAL COUNTER COMMANDER (SF-EA13)
The counter commander SF-EA13 is equipped with a printer in order
to print out audit data. The first line of any printed data will be the
machine number. This number is factory set to be 00000. Use P17 to
change the number from the factory setting.
Downloaded from:
http://www.usersmanualguide.com/
I
I
Loading Printer Paper
The counter commander SF-EA13 is equipped with a printer in order
to print out audit data. To insert paper:
Connect the counter commander to the copier.
1
Open the printer cover. Push the left guide to the left
2
with your thumb as shown in the figure and remove the
paper holder. Insert the holder into the new printer
paper.
Cut the lead of the printer paper so that the paper can
3
be inserted easily. Set the printer paper into the
counter commander. Be sure to set this in the proper
direction.
4
Insert the lead of paper toward the paper outlet and
press and hold the FEED key.
Press and hold the FEED key until the paper emerges from the
paper outlet.
Close the printer cover securely.
5
NOTE:
Use only specified printer paper. (Sharp Part No. SD-275PR)
Do not expose the printer paper to high temperature, exces-
sive humidity, or direct sunlight, as doing so could cause dis-
colouration of the paper.
Handle the printer paper with care. If perspiration or oils from
your hands come in contact with the printing surface of the
paper, printing may be faded or prevented completely.
Store the printer paper in a dark place.
23
Advertisement
