Graco PSM Instructions Manual page 30

HMI Display Operation and Identification
Setup Screen 4 - Sequence
F . 22 Sequence Setup Screen
IG
On the Sequence Setup Screen, select the
to display the System Main Screen. Select the
button to return to the previous screen. Select the
button to continue to the next screen.
Sequence includes 16 steps maximum. Step 0 and step
15 are used to start job (Pre-charge) and end job
(Depressurization). Operator can select functions
including shot, bead, reload and not used. If the shot or
bead function is selected, repeat time can be set (1-99).
30
Setup Screen 5 - Style
F . 23 Style Setup Screen
IG
button On the Style Setup Screen, select the
display the System Main Screen. Select the
button to return to the previous screen. Select the
button to continue to the next screen.
This screen includes 5 pages of 40 style numbers to set
target volume and tolerance. After each job, the system
compares the dispense volume and the target volume.
If the deviation is out of the tolerance, the system will
send out the signal.
button to
3A7273B