Graco PSM Instructions Manual page 29

Setup Screen 2 - Shot
F . 19 Shot Setup Screen
IG
On the Shot Setup Screen, select the
display the System Main Screen. Select the
button to return to the previous screen. Select the
button to continue to the next screen.
This screen includes 5 pages of 40 shot numbers to set
dispense rate and target volume.
3A7273B
Setup Screen 3 - Bead
F . 20 Bead Setup Screen (Preset value)
IG
button to
F . 21 Bead Setup Screen (Custom setting)
IG
On the Bead Setup Screen, select the
display the System Main Screen. Select the
button to return to the previous screen. Select the
button to continue to the next screen.
There are two Rate command types:
• Preset value: The flow rate is defined on Setup
Screen 2 - Shot, see page 29. 'Shot bit 0-3' signals
or style numbers are used to select flow rate.
• Custom setting: The operator should set 'Max
Rate' first. The Operator can use 0-10 V signal to
control flow rate.
HMI Display Operation and Identification
button to
29