Operation
Flush the Equipment
To avoid fire and explosion, always ground
equipment and waste container. To avoid static
sparking and injury from splashing, always flush at
the lowest possible pressure.
•
Flush out old fluid with compatible solvent before
introducing a new fluid.
•
Use the lowest possible pressure when flushing.
•
All fluid components are compatible with common
solvents.
•
To flush the system, put a waste container below
the TC Dispense Valve (AB, page 8), and circulate a
compatible solvent through the system for several
times until the TC Dispense Valve dispenses the
compatible solvent. Then drain the compatible
solvent
42
3A7273B