Table of Contents
Advertisement
HMI Display Operation and Identification
Manual Screen 1
F
. 16 Manual Screen 1
IG
On the Manual Screen 1, Press 'F1' or select the
button to display the System Main Screen. This button
can only be selected when the system is in standby or
alarm mode. When the operator has entered the
System Main Screen, the system will not work in
Automation mode. Select the
Manual Screen 2.
The content and functions of this screen are as follows:
•
: Select to execute the command of returning
to home point. The system must be inactive when
the 'HOME' button is selected. Check in the
information bar to see if the piston has returned to
the home point.
•
: When the piston returns to home point, the
system displays 'Reload' button. Select the button
to reload material.
•
: Select the button to execute pre-charge.
•
: Select the button to execute pressure relief.
•
: Select the button to execute purging.
•
: When the system sends out the alarm, select
the button to stop the alarm.
•
: Select the button to dispense material.
26
button to display the
Other information
For other information, please see Automatic Screen 2
- Main on page 21.
3A7273B
Advertisement
Table of Contents
