Table of Contents
Advertisement
Automatic Screen 2 - Main
F
. 10 Automatic Screen 2 - Main
IG
On the Automatic Screen 2 - Main, select the
button to display the Automatic Screen 1 - Main. Select
the
button to display the Automatic Screen 3 -
Main.
The content and functions of this screen are as follows:
Sensors status
To show the 3 slider position sensors.
Emergency stop status
•
Red circle: E-stop button is pushed in.
•
Green circle: E-stop button is released.
Servo motor signals
•
Servo ON: This signal will be shown as green after
system start.
•
Servo ready: Motor can be used or is working
without problem.
•
Servo alarm: Something is wrong with the motor.
Operator should push the reset button or send a
remote reset signal. If reset does not work, the
PSM control box needs to be restarted.
3A7273B
HMI Display Operation and Identification
Reload or dispense valve status
To show if the reloading valve or dispensing valve is
open.
Motor position and torque
To Show the number of motor steps. The torque of the
drive motor is shown in N•m.
Job style and target volume
To show the current style number and target volume
which defined on Setup Screen 5 - Style, see page 30.
21
Advertisement
Table of Contents
