Table of Contents
Advertisement
Automatic Screen 1 - Main
F
. 9 Automatic Screen 1 - Main
IG
Open the control box and wait for some time. The
system will display 'Automatic Screen 1 - Main'.
The content and functions of this screen are as follows:
•
: Select to display the System Main Screen.
This button is only available when the system is in
standby or has an alarm. When on the System Main
Screen, the system will not work in automation
mode.
•
: Select to display Automatic Screen 4 -
Maintenance record.
•
: Select to execute the command of returning
to home point. The system must be inactive when
the 'HOME' button is selected. Check in the
information bar to see if the piston has returned to
the home point.
•
: Select to display Automatic Screen 5 - Job
history.
•
: Select to display Automatic Screen 2 - Main.
•
: Select to display Automatic Screen 6 - Error
history.
3A7273B
HMI Display Operation and Identification
Information bar
•
To illustrate the current status of equipment, such
as Auto-Standby or Auto-Shot dispense.
•
To show error information when an alarm is active.
Status bar
•
Job style: To show the current style number which
defined on Setup Screen 5 - Style, see page 30.
•
Job target: To show the target volume which
defined on Setup Screen 5 - Style, see page 30.
•
Job time: To show the accumulative time of a job.
•
Job volume: To show the accumulative volume of
a job.
19
Advertisement
Table of Contents
