GVM -PRO-SD300C Manual page 13

FREQUENCY SETTINGS:
the dimming frequency, the frequency range is
15KHZ-25KHZ.
FAN SETTINGS: Rotate [Knob 1] to adjust the fan
settings, short press [Knob 1] to confirm the
selection.
LANGUAGE: Rotate [Knob 1] to set the system
language, supporting Chinese and English.
SYSTEM SETTINGS:
information and restore factory settings. Rotate
[Knob 1] to select whether to restore factory
settings.
② MODE:
There are 6 modes: CCT, HSI, RGB, Color gel, Light source match, and
Light effect.
Press the [MODE] button to enter the main mode selection page →
rotate [Knob 1] to select the mode → press [Knob 1] to enter the
corresponding mode interface → set the parameters in different
modes by pressing or rotating [Knob 1] → press [BACK] to get to
previous page.
CCT mode: Adjustable light intensity and color temperature.
INT: Rotate [Knob 1] to adjust the brightness.
CCT: Rotate [Knob 2] to adjust the color temperature.
G/M: Short press and then turn [Knob 2] to adjust the Green /
Magenta offset.
HSI mode: Color light mode, in this mode you can adjustable hue,
saturation, and light intensity (HSI = hue, saturation, light intensity),
This give you up to 36 million possible color combinations.
INT: Rotate [Knob 1] to adjust the brightness.
HUE: Rotate [Knob 2] to adjust the hue.
SAT: Short press and then turn [Knob 2] to adjust saturation.
Rotate [Knob 1] to set
View system firmware
11
MENU
FAN SETTINGS
Smart
FAN SETTINGS
SYSTEM SETTINGS
FW Ver
UID
Date
Factory Reset
High Silent
1.41
1701EE7B
2023-11-02 11:44
YES NO