Introduction - AutomationDirect CLICK PLUS PLC Getting Started

Chapter 1: Getting Started

Introduction

Purpose of this Manual
Thank you for purchasing the AutomationDirect CLICK PLUS PLC family of products.
This hardware user manual provides information that will help you install, set up, program,
troubleshoot, and maintain your CLICK PLUS PLC system. The manual includes information
that is critical to the safety of the personnel who will install and use the PLC, as well as the
integrity of the machinery, processes, and equipment controlled by the PLC.
The manual also includes important information about power and signal wiring, mounting of
the PLC, and configuring the PLC system.
About Getting Started
If you are familiar with PLCs in general, then following the simple steps in this first chapter
may be all you require to start being productive using a CLICK PLUS PLC system. After you
have completed these simple steps, your CLICK PLUS PLC will be running a ladder logic
project that you programmed. If you are new to the world of PLCs, be sure to read through all
of the chapters in this hardware user manual.
Supplemental Manuals and Other Help
The CLICK Programming Software, C0-PGMSW, can be downloaded free from the
AutomationDirect web site (link shown below under Technical Support). Both this Hardware
User Manual, C2-USER-M, and the Software Installation Guide are free as a download. The
CLICK Programming Software includes searchable online help topics covering all aspects of
the software and instruction set.
Technical Support
We strive to make our manuals the best in the industry. We rely on your feedback to let us
know if we are reaching our goal. If you cannot find the solution to your particular application,
or, if for any reason you need technical assistance, please call us at:
Our technical support group will work with you to answer your questions. They are available
Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern Time. We also encourage you
to visit our web site where you can find technical and non-technical information about our
products and our company.
1-2
CLICK PLUS PLC Hardware User Manual, 1st Edition, Rev. K – C2-USER-M
770–844–4200
http://www.automationdirect.com