AutomationDirect CLICK PLUS PLC Getting Started page 28

Chapter 1: Getting Started
Step 7: Establish PC to PLC Communications, (cont'd)
If you are trying to connect the CLICK Programming Software to a new CLICK PLUS PLC
or an existing CLICK PLUS PLC that was reset to the factory default, you will be prompted to
enter the default password, as follows:
• User: admin
• Password: click
When you download your first project, the admin account password must be set to something
other than the default before the project can be downloaded.
1-28
CLICK PLUS PLC Hardware User Manual, 1st Edition, Rev. K – C2-USER-M