AutomationDirect CLICK PLUS PLC Getting Started page 8

Chapter 1: Getting Started
Step 2: Launch Programming Software (cont'd)
The Main Window is divided into Menus, Toolbars, and Windows that work together to make
project development as simple as possible. See the software's online help for additional details.
Click on the "Start a new project" graphic in the Startup dialog box. The Select a CPU
Module window opens.
Select from the list on the left for the CLICK PLUS PLC unit that you will use for the ladder
logic example that follows.
1-8
CLICK PLUS PLC Hardware User Manual, 1st Edition, Rev. K – C2-USER-M