Kia EV6 2024 Owner's Manual page 447

Driver assistance system
Remote Operation
Operating order
Remote Operation operates in the fol-
lowing order:
1. Getting ready to remotely move for-
ward and backward
2. Remotely moving forward and back-
ward
1. Getting ready to remotely
move forward and backward
There are two ways to operate Remote
Operation function.
Method (1): Using the function
with vehicle off
OCV052089N_2
1. Within a certain range from the vehi-
cle press the door lock ( ) button on
the smart key and lock all doors.
2. Press and hold the Remote Start but-
ton ( ) within 4 seconds until the
vehicle starts.
* For more details on remotely starting
the vehicle, refer to "Smart key" on
page 5-7.
Method (2): Using the function
with vehicle on
OCV052090N_2
Remote Smart Parking Assist (RSPA)
OCV041184L
A: REMOTELY moving forward/back-
ward...
1 1. Unfasten driver's seat belt.
2 2. Leave car (keep the key) and
close doors.
3 3. Press and hold PARKING button
on car key.
1. Park the vehicle in front of the space
where you want to use Remote Oper-
ation function, and shift the gear to P
(Park).
2. Press and hold the Parking/View ( )
button to turn on Smart Parking
Assist. A message Under REMOTE
control will appear on the infotain-
ment system screen.
3. Get out of the vehicle with the smart
key and close all doors.
NOTICE
僅 Agree must be selected on the info-
tainment system screen and the info-
tainment system has to operate
properly to use Remote Operation
function.
僅 Method (2) can be used after the vehi-
cle has been driven above 3 mph (5
km/h).
僅 If the function is turned on again after
parallel parking is completed by
Remote Smart Parking Assist, Remote
Operation function can be used with
Method (2).
7
7 129
OwnersManuals2.com