Kia EV6 2024 Owner's Manual page 43

Electric vehicle guide
Leakage current failure (POWER
Green ON, FAULT Red Blink)
OCVQ011028L
僅 Disconnect and reconnect the power
plug to clear the error.
Power saving mode
OCVQ011029L
僅 Charge level indicator is turned off if
there is no status change for more
than 1 minute.
How to disconnect portable
charging cable (ICCB: In-Cable
Control Box) (sold separately)
1. Hold the charging connector handle
(2) and pull it while pressing the
release button (1).
OCVQ011066
Before disconnecting the charging
connector, make sure the vehicle's
doors are unlocked. When the doors
are locked, the charging connector
lock system will be triggered. And the
charging connector will not be discon-
nected.
However, in AUTO Mode, the lock is
released automatically when charging
is completed, and you can disconnect
the charging connector.
For more information, refer to the
"Charging connector lock" on page 1-
19.
CAUTION
In order to disconnect the charging con-
nector, unlock the vehicle's doors to
unlatch the charging connector lock sys-
tem.
If not, the charging connector and the
vehicle's charging inlet may be dam-
aged.
CAUTION
When disconnecting the charging con-
nector, do not try to disconnect it by
force while not pressing the release but-
ton. This may damage the charging con-
nector and vehicle charging inlet.
僅 If the charging connector lock does
not unlatch even after the vehicle's
doors are unlocked, open the liftgate,
and pull the emergency release lever
to disconnect the charging connector.
If such case occurs, the charging con-
nector lock function may be defective,
so have your vehicle inspected by an
authorized Kia dealer.
2. Make sure to completely close the AC
charging inlet cover.
Charging electric vehicle
1 35
OwnersManuals2.com
1