Kia EV6 2024 Owner's Manual page 17

Electric vehicle guide
1 EV Charge Transfer
Select EV → Vehicle to Load (V2L) on
the screen.
You can set the battery discharging limit
for high voltage battery for driving.
OCV041288L
A: EV Charge Transfer Settings
1 Discharging Limit
When the vehicle reaches the discharg-
ing limit, it automatically cuts the supply
of electricity.
Energy information
To check the discharging level, go to the
infotainment system screen and select
EV and the vehicle image.
How to connect
Exterior
OCVQ011001_4
1 Open the cover of the V2L connector.
2 Close the cover after connecting com-
patible appliances and electronic
products to the power outlet.
3 Connect the V2L connector to the
charging hole on the vehicle.
4 Press the switch (1) of the V2L con-
nector and check whether the light (2)
is on or off. The light (2) may not turn
on normally when:
僅 The battery discharging limit is set
higher than the actual charge of the
battery. Check the battery dis-
charging limit for high voltage bat-
tery for driving in Energy
Consumption menu on the screen.
僅 Check whether the light of V2L con-
nector or interior power outlet turns
on or not.
僅 If the warning message for V2L
appears on the cluster, refer to
"LCD display messages" on page 1-
10.
僅 If V2L does not work the same as
when connecting other compatible
appliances, have your vehicle
inspected by an authorized Kia
dealer.
5 Press the switch (1) to turn off the
light (2) the V2L will be off to stop V2L
charging. You can disconnect the V2L
connector when the light (2) has
turned off or you have deactIvated
the charging door lock by pressing
the door unlock button on the smart
key.
Interior
1. Use the mechanical key to unlock the
power outlet cover.
OCVQ011046
EV menu
1
1 9
OwnersManuals2.com