僅 Lcd Display Messages - Kia EV6 2024 Owner's Manual

Driving your vehicle
charge if left in the ACC position for a
long period.
D (Drive)
This is the normal driving position.
To shift to D (Drive), turn the shifter dial
to D (Drive) position while depressing
the brake pedal.
Shift-lock system
For your safety, your vehicle has a shift-
lock system which prevents shifting the
gear from P (Park) or N (Neutral) into R
(Reverse) or D (Drive) unless the brake
pedal is depressed.
To shift from P (Park) or N (Neutral) into
R (Reverse) or D (Drive), from R
(Reverse) into D (Drive) or from D (Drive)
into R (Reverse):
1. Depress and hold the brake pedal.
2. Start the vehicle or place the EV but-
ton in the ON position.
3. Press the R (Reverse) or D (Drive) but-
ton.
NOTICE
You cannot shift the gear while the
charging cable is connected.
When the battery (12V) is dis-
charged
You cannot shift the gear when the bat-
tery is discharged.
Jump start your vehicle (refer to "Jump
starting (12V battery)" on page 8-4) or
contact an authorized Kia dealer.
Parking
1. Always come to a complete stop and
continue to depress the brake pedal.
2. Shift to the P (Park) position.
3. Apply the parking brake.
4. Place the EV button in the OFF posi-
tion.
5. Take the key with you when leaving
the vehicle.
LCD display messages
If a message appears on the LCD dis-
play, refer to the next section for the
appropriate steps to take.
Shifting conditions not met
OCV051105L
A: Shifting conditions not met, Reduce
speed, then shift
The message appears on the LCD dis-
play in the following conditions:
1. When driving speed is too fast to shift
the gear. Decrease the vehicle speed
or slow down before shifting the gear.
2. When the gear is shifted while the
vehicle is in Utility mode.
Press brake pedal to change gear
OCV051106L
A: Press brake pedal to change gear
The message appears on the LCD dis-
play, when the brake pedal is not
depressed while shifting the gear.
Depress the brake pedal and then shift
the gear.
Reduction gear
6
6 9
OwnersManuals2.com