僅 Starting The Vehicle - Kia EV6 2024 Owner's Manual

Driving your vehicle
ON
Press the EV button while it is in the ACC
position without depressing the brake
pedal.
The warning lights can be checked
before the vehicle is started. Do not
leave the EV button in the ON position
for a long time. The battery may dis-
charge, because the vehicle is not run-
ning.
START/RUN
To start the vehicle, depress the brake
pedal and press the EV button with the
shifter dial in the P (Park) position.
If you press the EV button without
depressing the brake pedal, the vehicle
will not start and the EV button changes
as follow:
Go to OFF → ACC → ON → OFF or ACC
NOTICE
If you leave the EV button in the ACC or
ON position for a long time, the battery
will discharge.
WARNING
Starting Vehicle
Never press the EV button while the
vehicle is in motion except in an emer-
gency. This would result in loss of direc-
tional control and braking function,
which could cause an accident.
WARNING
Leaving the Vehicle
To avoid unexpected or sudden vehicle
movement, never leave your vehicle if
the reduction gear is not locked in the P
(Park) position and the parking brake is
fully engaged. Before leaving the driver's
seat, always make sure the reduction
gear is engaged in P (Park), set the park-
ing brake fully and shut the vehicle off.
Starting the vehicle
WARNING
Do not start the vehicle with the acceler-
ator pedal depressed. The vehicle can
move and lead to an accident.
僅 The vehicle will start by pressing the
EV button, only when the smart key is
in the vehicle.
僅 Even when the smart key is in the
vehicle, if it is far away from the
driver, the vehicle may not start.
僅 When the EV button is in the ACC or
ON position, and any door is open, the
system checks for the smart key.
When the smart key is not in the vehi-
cle, the READY indicator will blink and
Key not in vehicle message will come
on. When all doors are closed, the
chime will also sound for about 5 sec-
onds. Keep the smart key in the vehi-
cle when in the ACC position or if the
vehicle is ON.
1. Always carry the smart key with you.
2. Make sure the parking brake is
applied.
3. Make sure the shifter dial is in P
(Park).
4. Depress the brake pedal.
5. Press the EV button. If the vehicle
starts, the READY indicator will come
on.
NOTICE
僅 Always start the vehicle with your foot
on the brake pedal. Do not depress
the accelerator while starting the vehi-
cle.
EV button
6
6 5
OwnersManuals2.com