Kia EV6 2024 Owner's Manual page 214

Features of your vehicle
selecting "Vehicle →Lights → One Touch
Turn Signal".
NOTICE
If an indicator flash is abnormally quick
or slow, a bulb may be burned out or
have a poor electrical connection in the
circuit. The bulb may require replace-
ment.
High Beam Assist (HBA)
OCV041054
High Beam Assist is a function that auto-
matically adjusts the headlamp range
(switches between high beam and low
beam) depending on the brightness of
detected vehicles and certain road con-
ditions.
Detecting sensor
Front view camera
OCV051017N
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving. Refer to
the picture above for the detailed loca-
tion of the detecting sensor.
5 88
CAUTION
Always keep the front view camera in
good condition to maintain optimal per-
formance of High Beam Assist.
For more details on the precautions of
the front view camera, refer to "Forward
Collision-Avoidance Assist (FCA)" on
page 7-4.
High Beam Assist Setting
OCV041522N
A: Vehicle Settings
1 Lights
2 High Beam Assist
With the vehicle in the ON position,
select Setup → Vehicle → Lights →
High Beam Assist from the Settings
menu to turn on High Beam Assist func-
tion.
WARNING
For your safety, change the settings only
after parking the vehicle at a safe loca-
tion.
High Beam Assist operation
僅 After selecting High Beam Assist in
the Settings menu, High Beam Assist
will operate by following the proce-
dure below.
- Place the headlamp switch in the
AUTO position and push the head-
lamp lever towards the instrument
cluster. The High Beam Assist ( )
indicator light will appear on the
Lighting
OwnersManuals2.com