Kia EV6 2024 Owner's Manual page 19

Electric vehicle guide
WARNING
Electrical shock, serious injury and death
can result if you disobey the following
instructions:
僅 Do not touch the V2L connector or the
terminals in the vehicle charging port.
僅 Do not put metal objects to the V2L
connector or charging port.
僅 Do not touch the V2L connector,
charging port or power plug with a
wet hand or while standing in water or
with bare feet.
僅 Do not use the V2L connector,
charging port or power plug if they
are wet or dirty. Dry and clean them
first.
僅 Do not alter or disassemble the V2L
connector.
僅 When the power plug is connected or
disconnected to the V2L connector or
you open or close the connector cover
of the V2L, be careful not to be
scratched on the hand.
OCVQ011048
僅 Do not charge if the V2L connector,
charging port, power plug or cable are
damaged, corroded or rusted.
僅 Do not use if the sheath of home
appliance cables is damaged or bro-
ken or the connection is loose.
WARNING
Do not use your vehicle as a power
source for any high amperage appli-
cances such as irons, coffee pots, and
toasters. This could cause a fire, serious
injury and death.
NOTICE
Be aware of the precautions below to
prevent accidents.
僅 If V2L charging has stopped before
the vehicle is charged, it may be
because the system has overheated.
Check whether the V2L connector,
charging port or power plug are con-
taminated, worn, corroded or broken
or if the vehicle is drawing 16 amps.
When the temperature falls to normal
levels, you can use it again. (Use only
compatible appliances.)
僅 Do not modify or disassemble the pro-
vided V2L connector. The failure
caused by modifying or disassem-
bling is not covered by the warranty.
僅 Do not drop the V2L connector or give
a strong impact to it.
僅 Do not drop or hit the V2L connector.
僅 Be sure to disconnect the V2L connec-
tor from the vehicle when you are fin-
ished using V2L.
僅 When the high voltage battery charge
reaches the set discharging limit (%),
the operation stops, and a warning
message is displayed on the instru-
ment cluster. If you want V2L opera-
tion, set the discharging limit (%) lower
than the current battery charge.
僅 When using various electric appli-
ances, use them below the maximum
power capacity that can be supplied
by the vehicle.
僅 If you use an electrical appliance that
exceeds the maximum power capac-
ity that the vehicle can supply, the
operation will stop and a warning
message will be displayed on the
EV menu
1
1 11
OwnersManuals2.com