4 Operation
!
16
4.4
Brief operating instructions for the function
matrix
Note!
• See the general notes on page 17.
• Function descriptions → Chap. 9, page 26
HOME position → F → Enter the function matrix
1.
2.
Select a block (e.g. FUNCTION)
3.
Select a group (e.g. SIMULATION)
4.
Select a function group (e.g. OPERATION)
5.
Select a function (e.g. FLOW)
Change parameter / enter numerical values:
OS → Select or enter: enable code, parameters, numerical values
F → Save your entries
6.
Exit the function matrix:
– Press and hold down Esc key (X) for longer than 3 seconds → HOME position
– Repeatedly press Esc key (X) → return step by step to HOME position
Fig. 9:
Selecting functions and configuring parameters (function matrix)
PROline FieldCheck™
Endress+Hauser